 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ASL19W DC-3000 MHz High Linearity LNA MMIC Features *20 dB Gain at 850 MHz *0.9 dB NF *22 dBm P1dB *35.5 dBm Output IP3 *MTTF > 100 Years *Single Supply Description The ASL19W, a wideband linear low noise amplifier MMIC, has a low noise and high linearity at low bias current, being suitable for use in both receiver and transmitter of telecommunication systems up to 3 GHz. S11 down to -20 dB is easily achieved for low noise application to provide a good productivity. The amplifier is available in an SOT-89 package and passes through the stringent DC, RF, and reliability tests. ASL19W Package Style: SOT-89 Typical Performance Parameters Frequency Gain S11 S22 Output IP3 1) Units MHz dB dB dB dBm dB dBm mA V 850 20 -20 -18 35.5 0.9 22 73 5 Typical Low Noise 2000 13 -20 -15 37 0.9 22 73 5 2700 11 -16 -14 38 1.1 22 73 5 Applications *CDMA, GSM, W-CDMA, PCS Gain Block Amplifier *Low Noise Amplifier *IF Amplifier *WiBro/WiMAX Amplifier *Bluetooth Amplifier *Wireless LAN Amplifier Noise Figure Output P1dB Supply Current Supply Voltage 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Product Specifications Parameters Testing Frequency Gain S11 S22 Output IP3 Noise Figure Output P1dB Supply Current Supply Voltage Units MHz dB dB dB dBm dB dBm mA V 20 55 34 19 Min Typ 850 20 -20 -18 35.5 0.9 22 73 5 86 1.1 Max More Information Tel: (82) 42-528-7223 Fax: (82) 42-528-7222 ASB Inc., 4 FI. Venture Town Bldg., 367-17 Goijeong-Dong, Seo-Gu, Daejon 302-716, Korea th Absolute Maximum Ratings Parameters Operating Case Temperature Storage Temperature Supply Voltage Operating Junction Temperature Input RF Power (CW, 50ohm matched)* Rating -40 to +85C -40 to +150C +6 V +150C 22 dBm * Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf 1/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC OIP3 & Noise Figure Vs. Bias Resistor CDMA RD (ohm) RB (ohm) Vd (V) Ic NF (mA) (dB) 6.2k 5.6k 8.2 5.1k 4.7k 4.3k 6.2k 5.6k 10 5.1k 4.7k 4.3k 6.8k 6.2k 5.6k 12 5.1k 4.7k 4.3k 6.8k 6.2k 5.6k 15 5.1k 4.7k 4.3k 4.43 4.55 4.65 38 30 23 1.04 1.07 1.09 30.9 28.1 26.1 0.9 0.93 0.97 31.1 28.8 26.8 4.51 4.62 4.7 3.99 4.14 4.29 41 31 24 68 58 47 0.96 1.04 1.06 0.99 1.01 1.04 31.9 28.8 26.5 35.5 34.9 33.3 0.88 0.91 0.95 0.87 0.87 0.86 32.7 30 27.6 37 35.8 34.4 6.2k 5.6k 5.1k 4.7k 3.85 4.22 4.18 4.35 38 33 28 22 1.06 1 1.08 1.03 30.8 29.1 26.9 25.8 0.89 0.92 0.94 0.97 32.9 30.8 29 27.6 4.38 4.51 4.61 4.7 4.76 4.33 4.46 4.56 4.64 4.74 4.08 4.26 1.39 73 59 47 36 28 68 55 44 36 26 75 61 50 1.01 0.98 0.98 0.99 0.96 0.93 0.96 0.98 0.97 1.05 0.97 1.01 0.98 (dBm) 36 35.2 33.4 30.6 27.8 35.8 34.6 32.5 30.6 27 35.8 35.3 34 (dB) 0.86 0.86 0.87 0.9 0.96 0.84 0.87 0.88 0.91 0.95 0.89 0.86 0.88 (dBm) 38.4 37.1 34.4 30.8 27.7 38 36.2 33.9 30.5 27.8 37 37.2 30 35.8 6.8k 3.48 47 0.99 32.7 0.88 35.6 20 7.5k 6.8k 6.2k 5.6k 5.1k 4.7k 4.3k 11k 10k 9.1k 8.2k 7.5k 3.68 3.86 4.06 4.21 4.34 4.48 4.59 2.84 2.99 3.14 3.31 3.49 66 59 48 41 34 27 21 73 68 63 57 52 OIP3 NF OIP3 (ohm) (ohm) (V) (mA) (dB) 1.05 0.97 0.99 1.03 1.04 1.05 1.05 0.98 0.98 1.01 0.95 0.99 (dBm) 35.2 34.7 33.2 31.4 29.2 27.1 25.7 34.9 36.3 35.9 34.6 33.7 (dB) 0.89 0.88 0.86 0.9 0.92 0.94 0.99 0.88 0.87 0.89 0.89 0.86 (dBm) 36.8 36.5 35.2 33.5 31.2 29.1 27.5 36.5 38.8 37.8 36.5 35.6 WCDMA RD RB Vd Ic NF OIP3 NF OIP3 CDMA WCDMA * Test Application Circuit : ASL19W CDMA / WCDMA application circuit * OIP3 Test Condition : Freq. - 894MHz / - 2140MHz, +10dBm output power per tone * Vd : Applied voltage to the device 2/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 900 19 -7 -18 22 37 0.7 5 73 2000 13 -7 -18 22 37.5 0.9 5 73 APPLICATION CIRCUIT Low Noise 500 ~ 3500 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V Board Layout (FR4, 40x40 mm2, 0.8T) RD =8.2 D1=5.6V Zener Diode C4=10 nF C3=100 pF L1=39 nH Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. RF IN C1=100 pF 4.5 mm ASL19W C2=100 pF RF OUT L2=39 nH RB =6.2 k S-parameters & K-factor 30 5 25 20 -40 c o 25 c o 85 c o 0 -40 c o 25 c o 85 c o -5 Gain (dB) 15 S11 (dB) -10 10 -15 5 0 0 500 1000 1500 2000 2500 3000 3500 -20 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 0 5 -5 -10 -40 c o 25 c o 85 c Stability Factor 0 500 1000 1500 2000 2500 3000 3500 o 4 3 S22 (dB) -15 2 -20 -25 1 -30 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 3/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Current vs. Temperature 100 Gain vs. Temperature 22 90 21 80 20 Current (mA) 70 Gain (dB) 19 60 18 Frequency = 900 MHz 50 17 40 -60 -40 -20 0 20 o 40 60 80 100 16 -60 -40 -20 0 20 o 40 60 80 100 Temperature ( C) Temperature ( C) P1dB vs. Temperature 26 Output IP3 vs. Temperature 42 24 40 P1dB (dBm) 22 Output IP3 (dBm) 38 20 36 18 Frequency = 2000 MHz 34 Frequency = 2000 MHz 16 -60 -40 -20 0 20 o 40 60 80 100 32 -60 -40 -20 0 20 o 40 60 80 100 Temperature ( C) Temperature ( C) Output IP3 vs. Tone Power (Frequency = 2000 MHz) 50 45 40 Output IP3 (dBm) 35 30 25 20 -40 c o 25 c o 85 c o 15 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Pout per Tone (dBm) 4/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 70 24.5 -13 -15 21 32 2.9 5 73 150 24 -13 -18 21 32.5 2.9 5 73 300 22.5 -10 -18 21 34 2.8 5 73 APPLICATION CIRCUIT IF 30 ~ 400 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V Board Layout (FR4, 40x40 mm2, 0.8T) Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. R D =8.2 D1=5.6V Zener Diode C4=10 F C3=100 pF L1=1 RF IN C1=1 F ASL19W C2=1 F RF OUT R1=100 R B =6.2 k S-parameters & K-factor 30 0 25 -5 20 Gain (dB) 15 S11 (dB) 0 100 200 300 400 500 -10 10 -15 5 0 -20 0 100 200 300 400 500 Frequency (MHz) Frequency (MHz) 0 5 -5 4 -10 Stability Factor 0 100 200 300 400 500 3 S22 (dB) -15 2 -20 -25 1 -30 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 5/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) Magnitude S21 (dB) 450 23.5 -18 -18 21.5 32 1.15 5 73 APPLICATION CIRCUIT 450 +5 V Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V Board Layout (FR4, 40x40 mm2, 0.8T) Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. RD =8.2 D1=5.6V Zener Diode C4=10 nF C3=100 pF L1=39 nH RF OUT RF IN C1=150 pF 4.5 mm ASL19W C2=150 pF L2=18 nH RB =6.2 k S-parameters & K-factor 30 0 25 -5 20 -10 Gain (dB) 15 S11 (dB) 0 200 400 600 800 1000 -15 10 -20 5 -25 0 -30 0 200 400 600 800 1000 Frequency (MHz) Frequency (MHz) 0 5 -5 4 -10 Stability Factor 0 200 400 600 800 1000 3 S22 (dB) -15 2 -20 1 -25 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 6/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 698~787 20 -18 -14 22 35 0.8 5 73 APPLICATION CIRCUIT LTE 698 ~ 787 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V Board Layout (FR4, 40x40 mm2, 0.8T) R D =8.2 D1=5.6V Zener Diode C5=10 nF C4=100 pF L1=82 nH Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. RF IN C1=100 pF L2=8.2 nH ASL19W C3=100 pF RF OUT L3=47 nH C2=4 pF R B =6.2 k S-parameters & K-factor 30 0 25 -5 20 -10 S21 [dB] 15 S11 [dB] 500 600 700 800 900 1000 -15 10 -20 5 -25 0 400 -30 400 500 600 700 800 900 1000 Frequency [MHz] Frequency [MHz] 0 5 -5 4 -10 Stability Factor 500 600 700 800 900 1000 3 S22 [dB] -15 2 -20 1 -25 400 0 0 500 1000 1500 2000 2500 3000 3500 Frequency [MHz] Frequency (MHz) 7/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 824 20 -15 -18 22 35.5 0.9 5 73 894 20 -18 -15 22 35.5 0.95 5 73 APPLICATION CIRCUIT Low Noise CDMA 824 ~ 894 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V Board Layout (FR4, 40x40 mm2, 0.8T) R D =8.2 D1=5.6V Zener Diode C5=10 nF C4=100 pF L1=39 nH Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. RF IN C1=100 pF L2=6.8 nH ASL19W C3=100 pF RF OUT L3=47 nH C2=3.3 pF RB =6.2 k S-parameters & K-factor 25 0 20 -5 15 Gain (dB) -10 10 5 -40 c o 25 c o 85 c o S11 (dB) -15 -20 -40 c o 25 c o 85 c o 0 600 700 800 900 1000 1100 1200 -25 600 700 800 900 1000 1100 1200 Frequency (MHz) Frequency (MHz) 5 0 -5 4 -10 Stability Factor 1200 3 S22 (dB) -15 -20 -40 c o 25 c o 85 c o 2 -25 1 -30 600 0 700 800 900 1000 1100 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 8/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Current vs. Temperature 100 Gain vs. Temperature 24 90 22 Current (mA) 80 20 70 Gain (dB) 18 60 16 Frequency = 850 MHz 50 -60 -40 -20 0 20 o 40 60 80 100 14 -60 -40 -20 0 20 o 40 60 80 100 Temperature ( C) Temperature ( C) P1dB vs. Temperature 26 Output IP3 vs. Temperature 44 24 40 P1dB (dBm) 22 Output IP3 (dBm) 36 20 32 18 Frequency = 824 MHz 28 Frequency = 824 MHz 16 -60 -40 -20 0 20 o 40 60 80 100 24 -60 -40 -20 0 20 o 40 60 80 100 Temperature ( C) Temperature ( C) Output IP3 vs. Tone Power (Frequency = 824 MHz) 45 40 Output IP3 (dBm) 35 30 25 20 -40 c o 25 c o 85 c o 15 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Pout per Tone (dBm) 9/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 1750~1870 13.5 -18 -15 21 37 0.9 5 73 APPLICATION CIRCUIT Low Noise PCS 1750 ~ 1870 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V R D =8.2 D1=5.6V Zener Diode C5=10 nF C4=100 pF L1=39 nH RF IN C1=100 pF 4.5 mm ASL19W Board Layout (FR4, 40x40 mm2, 0.8T) Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. C3=100 pF RF OUT L2=39 nH C2=1 pF RB =6.2 k S-parameters & K-factor 30 0 25 -5 20 Gain (dB) -10 15 S11 (dB) 0 500 1000 1500 2000 2500 3000 3500 -15 10 -20 5 0 -25 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 0 5 -5 4 -10 Stability Factor 0 500 1000 1500 2000 2500 3000 3500 3 S22 (dB) -15 2 -20 1 -25 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 10/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 1850~1920 14.5 -15 -15 22 37 0.9 5 73 APPLICATION CIRCUIT Low Noise US PCS 1850 ~ 1920 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V R D =8.2 D1=5.6V Zener Diode C5=10 nF C4=100 pF L1=39 nH RF IN C1=100 pF 4 mm ASL19W Board Layout (FR4, 40x40 mm2, 0.8T) Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. C3=100 pF RF OUT L2=39 nH C2=1.2 pF RB =6.2 k S-parameters & K-factor 30 0 25 -5 20 Gain (dB) -10 15 S11 (dB) 0 500 1000 1500 2000 2500 3000 3500 -15 10 -20 5 0 -25 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 0 5 -5 4 -10 Stability Factor 0 500 1000 1500 2000 2500 3000 3500 3 S22 (dB) -15 2 -20 1 -25 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 11/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 1920~1980 13.5 -18 -15 22 37 0.9 5 73 2110~2170 13 -18 -14 22 37 0.9 5 73 APPLICATION CIRCUIT Low Noise WCDMA 1920 ~ 2170 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V R D =8.2 D1=5.6V Zener Diode C5=10 nF C4=100 pF L1=39 nH RF IN C1=100 pF 3.5 mm ASL19W Board Layout (FR4, 40x40 mm2, 0.8T) Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. C3=100 pF RF OUT L2=39 nH C2=1.2 pF RB =6.2 k S-parameters & K-factor 30 0 25 20 -40 c o 25 c o 85 c S11 (dB) o -5 -10 Gain (dB) 15 -15 10 5 -20 -40 c o 25 c o 85 c o 0 0 500 1000 1500 2000 2500 3000 3500 -25 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 0 5 -5 4 -10 Stability Factor 3500 3 S22 (dB) -15 -20 -40 c o 25 c o 85 c o 2 1 -25 0 500 1000 1500 2000 2500 3000 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 12/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Current vs. Temperature 100 Gain vs. Temperature 17 90 16 80 15 Current (mA) 70 Gain (dB) 14 60 13 Frequency = 2000 MHz 50 12 40 -60 -40 -20 0 20 o 40 60 80 100 11 -60 -40 -20 0 20 o 40 60 80 100 Temperature ( C) Temperature ( C) P1dB vs. Temperature 26 Output IP3 vs. Temperature 44 24 40 P1dB (dBm) 22 Output IP3 (dBm) 36 20 32 18 Frequency = 2170 MHz 28 Frequency = 2170 MHz 16 -60 -40 -20 0 20 o 40 60 80 100 24 -60 -40 -20 0 20 o 40 60 80 100 Temperature ( C) Temperature ( C) Output IP3 vs. Tone Power (Frequency = 2170 MHz) 50 45 40 Output IP3 (dBm) 35 30 o 25 20 -40 c o 25 c o 85 c 15 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Pout per Tone (dBm) 13/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 2300 12 -18 -17 22 37.5 1.0 5 73 2500 11.5 -18 -16 22 37.5 1.1 5 73 2700 11 -16 -14 22 38 1.1 5 73 APPLICATION CIRCUIT Low Noise 2300 ~ 2700 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +10 dBm/tone separated by 1 MHz. Schematic Vcc=5 V R D =8.2 D1=5.6V Zener Diode C5=1 F C4=100 pF L1=39 nH C3=100 pF ASL19W Board Layout (FR4, 40x40 mm2, 0.8T) Note: A shunt RB is a bias resistor requisite to operate ASL19W properly, while RD as a voltage drop resistor is added to apply 4.4 V to the device. A user can easily REDUCE an operating current by choosing different RB values with minimized loss only in OIP3 and P1dB. RF IN C1=100 pF 2.5 mm RF OUT L2=39 nH C2=1 pF RB =6.2 k S-parameters & K-factor 20 0 -5 15 Gain (dB) -10 10 S11 (dB) 2200 2400 2600 2800 3000 -15 5 -20 0 2000 -25 2000 2200 2400 2600 2800 3000 Frequency (MHz) Frequency (MHz) 0 5 -5 4 -10 Stability Factor 2200 2400 2600 2800 3000 3 S22 (dB) -15 2 -20 1 -25 2000 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 14/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) 176 0.8 24.3 -10 -14 20 30 1.7 5 37 23.6 -10 -15 20 30 1.6 5 37 264 APPLICATION CIRCUIT DVB-T ( V band ) 176 ~ 264 +5 V Gain Flatness (dB) Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1 MHz. Schematic Vcc=5 V R3=8.2 Board Layout (FR4, 40x40 mm2, 0.8T) C4=10 nF C3=100 pF L1=330 nH RF IN C1=10 nF ASL19W C2=100 pF RF OUT R1=230 R2=4.7 k S-parameters & K-factor 30 0 25 -5 20 Gain (dB) S11 (dB) 0 100 200 300 400 500 15 -10 10 -15 5 0 -20 0 100 200 300 400 500 Frequency (MHz) 0 5 Frequency (MHz) -5 4 -10 Stability Factor 0 100 200 300 400 500 3 S22 (dB) -15 2 -20 1 -25 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 15/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) Gain Flatness (dB) 478 0.6 17.3 -9 -9 20 28 1.43 5 37 16.8 -12 -20 16 25 1.48 5 37 862 APPLICATION CIRCUIT DVB-T ( U band ) 478 ~ 862 +5 V Magnitude S21 (dB) Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of -3 dBm/tone separated by 1 MHz. Schematic Vcc=5 V Board Layout (FR4, 40x40 mm2, 0.8T) R3=8.2 C6=10 nF C5=100 pF L2=39 nH RF IN C1=33 pF ASL19W C4=33 pF RF OUT L1=39 nH R1=4.7 k C2=10 pF R2=360 C3=3.3 pF S-parameters & K-factor 25 0 20 -5 -10 Gain (dB) 15 S11 (dB) -15 10 -20 5 -25 0 0 200 400 600 800 1000 -30 0 200 400 600 800 1000 Frequency (MHz) 0 5 Frequency (MHz) -5 4 Stability Factor 0 200 400 600 800 1000 -10 3 S22 (dB) -15 2 -20 1 -25 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 16/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Frequency (MHz) Magnitude S21 (dB) 1575 14.0 -14 -14 17 27.5 1.1 3.3 20 APPLICATION CIRCUIT GPS 1575 +3.3 V Magnitude S11 (dB) Magnitude S22 (dB) Output P1dB (dBm) Output IP3 (dBm) Noise Figure (dB) Supply Voltage (V) Current (mA) 1) 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. Schematic Vcc=3.3 V RD =11 D1=5.6V Zener Diode C5=1 F C4=100 pF L1=10 nH RF IN C1=100 pF L2=2.2 nH ASL19W L3=47 nH C2=1.8 pF R B =6.8 k R1=270 C3=100 pF RF OUT Board Layout (FR4, 40x40 mm2, 0.8T) S-parameters & K-factor 20 0 15 -5 Gain (dB) 10 S11 (dB) 1450 1500 1550 1600 1650 1700 1750 1800 -10 5 -15 0 1400 -20 1400 1450 1500 1550 1600 1650 1700 1750 1800 Frequency (MHz) 0 5 Frequency (MHz) -5 4 -10 Stability Factor 1450 1500 1550 1600 1650 1700 1750 1800 3 S22 (dB) -15 2 -20 1 -25 1400 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 17/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC NF OIP3 P1dB 18/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 ASL19W DC-3000 MHz High Linearity LNA MMIC Outline Drawing (Unit: mm) Function Input Ground Output Pin No. 1 2 3 3 2 2 1 Mounting Recommendation (Unit: mm) Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification & Moisture Sensitivity Level ESD Classification HBM MM Class 1A Voltage Level: 400 V Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260C reflow 19/19 ASB Inc. * sales@asb.co.kr * Tel: +82-42-528-7223 February 2009 |
Price & Availability of ASL19W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |